社交网络中基于网络结构支撑模型的谣言传播研究

结合结构支撑理论，探究节点网络结构支持力的一些性质，提出了社交网络结构中的全网支持力和被支持力的总量一致性，并进一步提出计算节点支持力的方法。谣言作为特殊信息，在支持力不同节点之间的传播特性有所不同，借鉴随机游走模型中的PageRank计算方法，对不同节点支持力的谣言传播以及传播后的辟谣状况进行了仿真模拟，结果表明支持力不同的节点对于谣言传播和辟谣影响明显。     

WSNs中规避攻击者的源位置隐私保护路由协议

为了保证无线传感器网络（Wireless Sensor Networks，WSNs）中的源节点位置隐私安全，同时实现安全性能和网络能耗的均衡，提出了WSNs中规避攻击者的源节点位置隐私路由协议，该协议假设节点具有检测攻击者的能力，通过发出危险警告消息使路由路径上的节点采取路由改变策略，使攻击者无法回溯到源节点，延长了源节点保持位置隐私的安全时间。理论分析和仿真实验表明，该协议在消耗较少的通信开销的情况下保证了源节点位置的高度隐私。     

多先验融合的图像显著性目标检测算法

为了更加准确地检测出图像中的显著性目标，提出了多先验融合的显著性目标检测算法。针对传统中心先验对偏离图像中心的显著性目标会出现检测失效的情况，提出在多颜色空间下求显著性目标的最小凸包交集来确定目标的大致位置，以凸包区域中心计算中心先验。同时通过融合策略将凸包区域中心先验、颜色对比先验和背景先验融合并集成到特征矩阵中。最后通过低秩矩阵恢复模型生成结果显著图。在公开数据集MSRA1000和ESSCD上的仿真实验结果表明，MPLRR能够得到清晰高亮的显著性目标视觉效果图，同时F，AUC，MAE等评价指标也比现有的许多方法有明显提升。     

开关磁阻电机结构性转矩脉动抑制方法

开关磁阻电机具有结构简单、成本低和调速范围广等优势,但其双凸极结构和控制器的开关特性,导致存在转矩脉动现象,使得抑制转矩脉动成为焦点问题。首先从开关磁阻电机的结构和运行机理出发,针对线性解析方法难以分析转矩特征的问题,建立电机有限元模型求解出转矩特征并进行样机验证试验。分析样机结构参数对转矩脉动的影响,针对结构参数耦合问题,选择NSGA-Ⅱ算法在参数优化平台上对样机结构参数进行多目标寻优,在保证优化后样机的转矩脉动系数和平均转矩均优于初始电机的条件下,最终获得样机最优化结果。结果表明,不同结构参数对电机转矩的影响有较大的差异,对结构参数的优化能有效地抑制转矩脉动,该参数优化方法可以为开关磁阻电机结构性转矩脉动抑制提供参考。     

Structural analysis and optimization of a tethered swept wing for airborne wind energy generation

In this paper, we present an aero‐structural model of a tethered swept wing for airborne wind energy generation. The carbon composite wing has neither fuselage nor actuated aerodynamic control surfaces and is controlled entirely from the ground using three separate tethers. The computational model is efficient enough to be used for weight optimisation at the initial design stage. The main load‐bearing wing component is a nontypical “D”‐shaped wing‐box, which is represented as a slender carbon composite shell and further idealised as a stack of two‐dimensional cross section models arranged along an anisotropic one‐dimensional beam model. This reduced 2+1D finite element model is then combined with a nonlinear vortex step method that determines the aerodynamic load. A bridle model is utilised to calculate the individual forces as a function of the aerodynamic load in the bridle lines that connect the main tether to the wing. The entire computational model is used to explore the influence of the bride on the D‐box structure. Considering a reference D‐box design along with a reference aerodynamic load case, the structural response is analysed for typical bridle configurations. Subsequently, an optimisation of the internal geometry and laminate fibre orientations is carried out using the structural computation models, for a fixed aerodynamic and bridle configuration. Aiming at a minimal weight of the wing structure, we find that for the typical load case of the system, an overall weight savings of approximately 20% can be achieved compared with the initial reference design.     

金属有机骨架材料（MOFs）用于气态轻烃的高效分离研究进展

气态轻烃（C₁～C₃）如甲烷、乙烯、丙烯分别作为应用最广的清洁燃料和大宗化工产品，在国民经济中占据重要的地位。然而，在其生产过程中广泛存在着分离与提纯能耗较高的问题。金属有机骨架材料（MOFs）作为第三代新型多孔材料，近年来在轻烃分离领域显示出巨大的应用潜力。本文综述了MOFs用于气态轻烃分离的现状和机理，总结了本文作者课题组针对不同轻烃产物的分离要求，对MOFs进行了精确的孔径调控、配体功能化修饰、构筑吸附位点、调变柔性结构“开口压力”等，实现了多种气态轻烃组分的高效分离。最后，针对低碳烃工业分离过程中存在的关键问题，对MOFs材料的吸附分离机理进行了深入分析，以及MOFs工业化应用所面临的结构稳定性与分离工艺匹配等进行了展望。     

公众素质、外部环境对公众再生水接受态度的影响

公众对再生水的接受态度是再生水推广的关键。构建公众素质、主观规范、信息公开、政策环境、再生水接受态度与再生水接受意愿的关系假设模型,并以356份来自西安市居民问卷作为调研对象,运用结构方程模型进行实证分析。结果表明,接受态度正向影响接受意愿,其中主观规范是影响再生水接受态度的主要因素,信息公开与公众素质是次要因素,政策环境对再生水接受态度的影响不显著。     

碳酸镉转化制备氢氧化镉及产物光催化降解性

用碳酸钠溶液直接混合硫酸镉溶液制备了沉淀碳酸镉,再以沉淀碳酸镉为基体,氢氧化钠溶液为转化剂,通过阴离子交换制备出氢氧化镉纳米材料。采用X射线衍射仪（XRD）和场发射扫描电子显微镜（FESEM）对沉淀碳酸镉和转化产物的结构和形貌进行了表征。结果表明,沉淀碳酸镉的结构遭到破坏,转化完全所得到的氢氧化镉的形貌完全不同于沉淀碳酸镉,为片状组装的不规则球体。紫外光照射下光催化降解罗丹明B染料测试表明,转化产物比沉淀碳酸镉具有更好的光催化降解性能,转化时间不同的产物表现出不同的降解效率。当20 mg的转化产物分散到50 mL 8 mg/L的罗丹明B染料中,在黑暗环境中磁力搅拌吸附120 min达吸附平衡,开启300 W紫外汞灯后,效率最高的转化产物可在180 min内将染料完全降解。     

RESERVOIR PROPERTIES OF BARREMIAN – APTIAN URGONIAN LIMESTONES,SE FRANCE,PART 1: INFLUENCE OF STRUCTURAL HISTORY ON POROSITY-PERMEABILITY VARIATIONS

Upper Barremian – Lower Aptian inner platform “Urgonian” limestones in the Mont de Vaucluse region, SE France, consist of alternating metre-scale microporous and tight intervals. This paper focuses on the influence of structural deformation on the reservoir properties of the Urgonian limestone succession in a study area near the town of Rustrel. Petrographic, petrophysical and structural data were recovered from five fully-cored boreholes, from the walls of a 100 m long underground tunnel, and from a 50 m long transect at a nearby outcrop. The data allowed reservoir property variations in the Urgonian limestones to be studied from core to reservoir scale. Eleven Reservoir Rock Types (RRTs) were identified based on petrographic features (texture, grain size), reservoir properties (porosity, permeability), and the frequency of structural discontinuities such as fractures, faults and stylolites. Tight and microporous reservoir rock types were distinguished. Tight reservoir rock types were characterised by early cementation of intergranular pore spaces and by the presence of frequent structural discontinuities. By contrast microporous reservoir rock types contained preserved intragranular microporosity and matrix permeability, but had very few structural discontinuities. Observed vertical alternations of microporous and tight rock types are interpreted to have been controlled by the early diagenesis of the Urgonian carbonates. Deformation associated with regional-scale tectonic phases, including Albian – Cenomanian “Durancian” uplift (∼105 to 96 Ma) and Pyrenean compression (∼55 to 25 Ma), resulted in the modification of the initial petrophysical properties of the Urgonian limestones. An early diagenetic imprint conditioned both the intensity of structural deformations and the associated circulations of diagenetic and meteoric fluids. Evolution of the Reservoir Rock Types is therefore linked both to the depositional conditions and to subsequent phases of structural deformation.     

（S）-噻吗洛尔半水合物的合成及表征

为了开发β受体阻断剂新药（S）-噻吗洛尔半水合物，采用3-吗啉-4-氯-1，2，5-噻二唑为起始原料，经水解反应得到中间体1（3-吗啉-4-羟基-1，2，5-噻二唑）。中间体1与R-环氧氯丙烷发生醚化反应，经后处理及重结晶得到中间体2 {（R）-4-［4-（环氧乙烷-2-基甲氧基）-1，2，5-噻二唑-3-基］吗啉}。中间体2经胺化反应、马来酸成盐及重结晶得到（S）-马来酸噻吗洛尔。（S）-马来酸噻吗洛尔经游离、纯水转晶得到符合药典标准的（S）-噻吗洛尔半水合物，总收率14.05%且e.e.值为99.66%。最终成品经IR、1H-NMR、13C-NMR、MS、TGA、DSC表征，并优化各步反应条件。结果表明:以三乙胺为醚化反应缚酸剂75 ℃反应最佳；以乙醇为胺化反应溶剂46 ℃反应16 h最佳；S-噻吗洛尔的转晶拆分以水作溶剂，比传统不对称合成工艺安全稳定，操作简单，适合工业化生产。